Parts Inventory

Here is a list of all the parts used in these examples. They can be obtained from various sources, though I used arduino.cc, sparkFun.com, and adafruit.com to build the repository.

Inventory:

• 1 UDA1334 I2S Amp & Decoder (also works with the MAX98357 I2S amp, available from SparkFun or Adafruit)
• 1 SPH0645 I2S Mic (also works with the INMP I2S mic, available from Amazon, or the Invensense ICS43434, available from Tindie )
• 1 VS1053 MP3 Decoder/Synth module (also works with other VS1053 boards)
• 1 MKR Zero
• 1 MKR1010 WiFi/Bluetooth LE
• 1 Nano 33 IoT
• 1 Level Shifting MicroSd Breakout board
• 4 Arcade pushbuttons
• 4 Arcade pushbutton cables
• 4 breadboard pushbuttons
• 1 full breadboard
• 1 mini breadboard
• 2 force sensing resistors (FSRs) with screw terminals
• 2 Piezos with screw terminals
• 1 8-ohm speaker with wires (or any other speaker in the 8-ohm range)
• 1 SRF-04 ultrasonic sensor (here’s another version of the same sensor)
• 2 10-kilohm potentiometers
• 2 potentiometer knobs
• 2 rotary encoders w/knobs
• 1 joystick
• 8 photoresistors
• 1 needle-nosed pliers
• 1 multi-head screwdriver
• 1 MAX4466 mic with adjustable gain (also works with this Electret Microphone Breakout)
• 1 microSD Card
• 1 USB SD card reader
• assorted 10-kilohm resistors
• assorted 1-kilohm resistors
• assorted 220-ohm resistors
• 1 5-pin MIDI connector (here’s another version)
• assorted breakaway header pins
• Jumper wires
• 2 Stereo mini 3.5mm audio jacks (here’s another version)
• Alligator clips